Electro-osmotic pore pressures in soil due to an alternating electrical field

Pore pressure development in a soil specimen due to electro-osmosis under alternating current conditions is examined theoretically. Solutions to the governing equation are derived for one-dimensional flow with boundary conditions corresponding to an impervious (conventional no-flow boundary), a partially drained boundary, and a partially drained boundary with an intervening permeable zone between the boundary and the soil. These latter two boundary conditions can arise from details of pore pressure measuring systems at the specimen boundaries during laboratory experiments. An analysis of the solutions indicates that for a perfect no-flow boundary, excess pore pressures measured at an electrode consist of a steady state and rapidly-decaying transient response. The pore pressures exhibit a 45 degree phase shift relative to the applied electric current. The effect of the partially drained boundary is to reduce the peak to peak amplitude of the pore pressure and to increase the phase shift to as much as 90 degrees depending on the compressibility of the pore pressure measuring system. The effect of the impeded and partially drained boundary is to further reduce the amplitude of the pore pressures and to increase the phase shift to as much as 180 degrees depending on the relative permeability of the impeded boundary.     

Atmospheric pressure plasma treatment on graphene grown by chemical vapor deposition

We demonstrate the surface treatment of graphene using an atmospheric pressure plasma jet (APPJ) system. The graphene was synthesized by a thermal chemical vapor deposition with methane gas. A Mo foil and a SiO₂ wafer covered by Ni films were employed to synthesize monolayer and mixed-layered graphene, respectively. The home-built APPJ system was ignited using nitrogen gas to functionalize the graphene surface, and we studied the effect of different treatment times and interdistance between the plasma jet and the graphene surface. After the APPJ treatment, the hydrophobic character of graphene surface changed to hydrophilic. We found that the change is due to the formation of functionalities such as hydroxyl and carboxyl groups. Furthermore, it is worth noting that the nitrogen plasma treatment induced charge doping on graphene, and the pyridinic nitrogen component in the X-ray photoelectron spectroscopy spectrum was significantly enhanced. We conclude that the atmospheric pressure plasma treatment enables controlling the graphene properties without introducing surface defects.     

A study of the gasification of carbon black with molten salt of Li2CO3 and K2CO3 for application in the external anode media of a direct carbon fuel cell

The characteristics of gasification reactions for carbon–carbonate mixtures were experimentally investigated at high temperatures up to 900 °C, considering the application of the mixtures to the external anode media of a direct carbon fuel cell. A thermo-gravimetric analysis (TGA) was conducted in either a nitrogen or carbon dioxide ambient environment for Li₂CO₃, K₂CO₃ and a mixture of these two substances with carbon black. Changes in the exit gas composition were also monitored during the heating process. It was shown that gasification in the mixture media occurs much more rapidly than carbonate decomposition at elevated temperatures, even for low concentrations of CO₂. It was also shown that the loading of carbonates to carbon significantly affects the global gasification reaction; it increased the reaction rate by an order of magnitude and decreased its activation energy. Based on the experimental observations, a simplified reaction model of gasification was suggested for the anode media of a DCFC, regarding carbonate-catalysed and metal-catalysed pathways of Boudouard reactions.     

Role of nickel and manganese in recovery of resistivity in iron-based alloys after low-temperature proton irradiation

This study investigates the recovery of electric resistivity in pure iron, Fe–0.6Ni and Fe–1.5Mn as related to isochronal annealing following 1 MeV proton irradiation at lower temperature than 70 K, focusing on the relationship between solute atoms and irradiation defects. Both nickel and manganese prevent stage I_D recovery, which corresponds to correlated recombination. Stage II recovery is also changed by the addition of a solute, which corresponds to the migration of small interstitial clusters. In both pure iron and Fe–0.6Ni, no evident difference was observed in the stage III region, which corresponds to the migration of vacancies. In contrast, two substages appeared in the Fe–1.5Mn at a higher temperature than stage III_B appeared in pure iron. These substages are considered to represent the release of irradiation-induced defects, which was trapped by manganese.     

系留气球差压数据的三余度设计

鉴于气囊差压数据对系留气球压力调节的至关重要性,提出了一种差压数据的余度设计方法。在分析差压传感器组成特点的基础上,采用硬件双余度差压传感器配置实现了气囊差压数据的三余度设计,并给出了基于互比监控的故障判定逻辑和故障处置方法,以较低的成本大幅提高了系留气球差压测量的容错能力。     

改进蚁群PID-神经元解耦的CFB锅炉燃烧系统控制

床温和主汽压都是循环流化床锅炉生产运行中的重要参数,会直接影响机组的安全性和经济性。但由于这两者对象存在非线性、大时延、强耦合等特点,其现场控制效果一直不太理想。本文首先采用自适应神经元将床温和主汽压解耦,再利用具有分工特征的蚁群算法优化参数的PID控制器对两者进行独立控制。采用该算法优化常规PID控制参数,能够实现控制参数的快速寻优。该方案应用于循环流化床锅炉燃烧系统仿真,结果表明能有效实现系统解耦,且具有响应快、超调量小等优点,有效地提高了控制品质。     

基于PCI总线的矩阵电路在压变温压补偿系统中的实现与应用

本文提出基于PCI总线驱动控制的矩阵电路在压力变送器温压补偿系统中应用的目的是解决现有压力变送器温压补偿系统中HART总线型工位电路数量少,整套矩阵电路缺失冗余性,以及现有电路在压力变送器产品温压补偿中实用性差、维护成本高的问题。文中阐述的矩阵电路是以PCI总线为基础,实现对PIO数字接口卡的驱动控制,完成由PCI总线上32路数字I/O到168路数字I/O的转换,并利用168路数字I/O进行继电器矩阵电路设计,实现了弱电控制强电的过程,成功有效的解决了现存压力变送器温压补偿系统中矩阵电路存在的问题。该研发成果已经应用于PDS压力变送器产品温压补偿生产线上,并且该电路的设计能够满足压力变送器生产企业的需求,而且整套电路融入系统中能够长期稳定、可靠的运行。     

预制层溅射气压对CIGS薄膜结构及器件的影响

研究了金属预制层制备过程中溅射气压对Cu(In_1-xGa_x)Se₂(CIGS)薄膜及电池器件性能的影响.通过调节溅射气压改变预制层的结晶状态及疏松度与粗糙度,在合适的预制层结构下,活性硒化热处理过程中,可使Ga有效地掺入到薄膜中形成优质的CIGS固溶体.高溅射气压会使预制层过于致密,呈现非晶态趋势.经活性硒化热处理后,CIGS薄膜容易产生CIS与CGS"两相分离"现象,从而导致CIGS薄膜太阳电池的开路电压和填充因子降低,电池转换效率由10.03%降低到5.02%.